• Not just a preservative. Eyesaline® delivers the proven advantages of a preserved, buffered, saline solution.
• Physiologically balanced to reduce the likelihood of causing additional damage to the injured eye.
• Contains a proven preservative combination that inhibits bacterial growth.

Eyesaline Solution (#32-000502-0000) Available in one gallon (3.8 liters) containers. Use directly from the container to fill your eye wash station. 14-1/2"x 9-1/2"x11-3/4" Quantity: 4/case, 36 lb

Eyesaline® Concentrates

Eyesaline Concentrate is specifically formulated to be mixed with potable water. Concentrate mixes quickly with water to provide a preserve, buffered, saline solution.

		Eyesaline Concentrate (#32-000513-0000) Mix the entire container with water to fill self-contained eye wash stations with a capacity of 14 to 16 gallons (53 to 61 liters). Mixing Ratio: Ten parts water to one part concentrate . 13-1/2"x19"x10" Quantity: 4/case, 51 lb
		Eyesaline Concentrate (#32-000509-0000) Mix the entire container with water to fill self-contained eye wash stations with a capacity of 5 to 7 gallons (19 to 26 liters). Mixing Ratio: Ten parts water to one part concentrate. 12"x11"x 9-1/2" Quantity: 6/case, 32 lb

Eyesaline Solution or Eyesaline Concentrate mixed with tap water may not be suitable for use with certain eyewash devices. Eyewash devices containing metal parts may corrode when in contact with a saline solution.

Recommendation: For best results, mix concentrate with warm filtered water.

Although the use of Eyesaline or other additives will inhibit bacterial growth, NO preservative can safely prevent build-up over an extended period of time. All eye wash devices containing Eyesaline or other solution additives should be cleaned and refilled at least once every three to six months. Failure to replace the flushing solution within the recommended time can result in unsafe bacterial levels. Self-contained eye washes containing water must be cleaned and refilled weekly.

Personal Eyewash Products

Maintaining sterility over the life of a product relies, in part, on the integrity of the container seal. Components of the container, such as bottles, caps and seals, must be designed and manufactured to close tolerances if the integrity of the product in the container is to be maintained. This is particularly necessary in industrial settings with a wide range of environmental conditions. Personal emergency eyewash products currently available in the industrial first aid and safety market are manufactured using conventional clean room fill processes and separate components.

Containers, caps and seals may be manufactured from different materials and supplied by multiple vendors.

In the blow-fill-seal process, the plastic containers are sequentially blow molded, filled, and hermetically sealed in a continuous operation in a controlled environment. This process ensures seal integrity and eyewash solution quality.

Manufactured by the blow-fill-seal process. This process provides greater assurance of product integrity in single-use containers

 

• Sterile, buffered, isotonic, saline solution
• Single-use products
• Twist-off tabs – no seals to remove, no leaking caps. Twist-off tab top is tamper resistant, yet easily removed in an emergency
• Absence of the twist-off tab top provides highly visible notification that product has been used or tampered with.
• All containers manufactured from FDA grade polyethylene.
• 32 oz. bottle has reduced diameter and integral gripping surfaces for easier handling in an emergency.
• 16 oz. and 32 oz. containers have nozzles that provide extended flow (compared to conventional 16 and 32 oz. containers)
• 1 oz., 4 oz., and 8 oz. products deliver drops of solution or an irrigating stream, depending on the squeeze pressure applied to the bottle.

Product Number, Case Dimensions and Quantities

1 oz. Personal Eyewash Bottle (#32-000451-0000)
4"x5"x 9", 24/case, 3 lb

4 oz. Personal Eyewash Bottle (#32-000452-0000)
6"x7"x11", 24/case, 8 lb

8 oz. Personal Eyewash Bottle (#32-000453-0000)
6"x8"x11", 24/case, 8 lb

16 oz. Personal Eyewash Bottle (#32-000454-0000)
7"x9-1/2"x12-1/2", 24/case, 15 lb

32 oz. Personal Eyewash Bottle (#32-000455-0000)
10"x11"x15", 24/case, 29 lb
 

Wall Stations

Easy Access Emergency Eyewash Devices

Durable Eyesaline Wall Stations provide close-to-the-work convenience and immediate accessibility. If the eye injury is not incapacitating,the injured person can be helped to an emergency eyewash device during the initial flushing, helping to eliminate any delay in obtaining complete 15-minute decontamination of the eye(s). Directions for use are permanently printed on each wall station. Wall Stations are Eyesaline green for easy identification.

		32 oz. Single Wall Station (#32-000461-0000) The Single Wall Station contains one 32 oz. (.95 L) or 16 oz. squeeze bottle of Eyesaline Solution for immediate usage. The Single Wall Stations mount easily with peel-off self-adhesive (included) or screws. High visibility in any eye hazard area, ready for emergency flushing and decontamination of the eyes and face. 22-1/2"x15"x13" Quantity: 8, 28 lb 16 oz. Single Wall Station (#32-000460-0000) 22-1/2"x15"x13", Quantity: 8, 16 lb
		32 oz. Double Wall Station (#32-000462-0000) The double wall station contains two 32 oz. (.95 L) squeeze bottles of Eyesaline Solution for immediate usage. 22-1/4"x15"x13" Quantity: 4 stations, 26 lb
		Wall Station Retention Straps (#32-000472-0000) Retention Straps are designed to "strap-in" an eyewash bottle to a Wall Station that is mounted on a moving vehicle or any other unstable shaky, or transitory surface. Each strap is made of sturdy, clear vinyl, and attaches to Wall Stations with an adhesive on one end and a Velcro® on the other for easy, fast opening and closing. Retention straps are conveniently sized and can be attached to both 16 oz. and 32 oz. size bottles on any manufacturer's Wall Station. Case Qty: 10

Wall Station Refills

		16 oz. Squeeze Bottles (#32-000454-0000) Contain Eyesaline Solution in a single-use bottle with a tab top. Refills for Wall Station #32-000460-0000. 7" x 9 1/2"x 12 1/2", 12/case, 15 lb
		32 oz. Squeeze Bottles (#32-000455-0000) Contain Eyesaline Solution with extended flow nozzle and integral gripping surfaces, sealed for protection with a twist-off cap. Packed 12 bottles per case. Refills for Wall Stations #461 and #32-000462-0000. 10" x 11" x 15", 12/case, 29 lb

Body Flush Station

• Double Wall Station holds bottles firmly in place with easy access to bottles in an emergency
• Station made of durable, easy to clean plastic
• Wall Station overhang protects bottles from dust and debris
• Station mounts to wall with tape or screws
• Each station includes two 32 oz. bottles of body flush for accidents involving acids, caustics and other water-soluble irritants
• Bottle twist-off top is easily removed in an emergency, no seals to remove, no leaking caps
• Bottles have gripping surfaces for easier use and smaller opening than conventional bottles to provide extended flow